Network Setup

The screen will indicate if WiFi is on or off.

Once WiFi is set to "on", you can select a network from the list that appears on the screen.

If your WiFi network requires a password, you will be prompted to enter it. The VCS will reconnect to this WiFi network every time it is powered on.

To disconnect from WiFi, simply toggle WiFi to "off."

Configure a new Ethernet connection on your VCS by going to SYSTEMS > NETWORK > ETHERNET. Toggle Ethernet into the on position. If your VCS is connected to a network via an Ethernet cable, the VCS will automatically connect to it once Ethernet is toggled on, you will see your network name appear on the screen.